For 2000-2005 Ford Taurus Mercury Sable Front & Rear 3.0L Catalytic Converter

Description: For 2000-2005 Ford Taurus Mercury Sable Front & Rear 3.0L Catalytic Converter Specification:19067(Front) Body Material: Stainless Steel Inlet Gasket: 1 Inlet Hardware: None Inlet Type A: 2 Bolt Loose Flange w/ Spherical Flare O2 Sensor Ports: 2 Outlet Gasket: 1 Outlet Hardware: None Outlet Type A: 2 BOLT WELDED Outlet Type B: 2 BOLT WELDED Overall Length (IN): 29 Substrate Material: Ceramic Type: Federal / EPA Direct-Fit19066(Rear)Body Material: Stainless Steel Executive Order: D-798-9 Inlet Gasket: Yes Inlet Hardware: None Inlet Type A: 2 Bolt welded flange Issued Company: AP Exhaust Holdings, LLC O2 Sensor Ports: None Outlet Gasket: Not Required Outlet Hardware: Yes Outlet Type A: 2.25" OD Pipe Overall Length (IN): 32.5 Substrate Material: Ceramic Type: CARB Compliant Direct-FitFeatures:EPA CompliantDirect fit for installation onto existing exhaust system. Hardware included. 100% new.Made from premium quality materials to meet orginal specifications.Precious metals and large substrate minimize pollutants in your exhaustQuality inspected and tested - high heat resistance, low emissions and sounds levelsSpecial design for maximum flow increases the power and performance of your engineFitment: 2000-2005 Ford Taurus 3.0L 2000-2005 Mercury Sable 3.0LPackage Included:2x Catalytic Converter w/Installation AccessoriesCaution:Converters are designed to last the life of a vehicle. If your converter needs to be replaced it may be due to an emissions error/problem in your engine tuning. Converters that overheat due to engine problems may turn blue or bronze. These problems must be corrected BEFORE installation of a new converter.Any modifications of any kind will void all warranty coverage for this item.Warranty is voided if catalytic converter substrate is melted or broken; this is due to an issue with the car itself and not the catalytic converter.Due to its size and shape it may encounter cosmetic flaws during its stocking and shipping process. The powder coating finish is designed to add shelf life by minimizing surface scratches which may deteriorate over time due to temperatures reached once in use.Products damaged as a result of abuse, misuse, improper repair, improper installation, alteration or modification will not be covered by the warranty.O2 sensors must be replaced when you replace the converter or warranty will be void. We have determined that failure of either the front O2 sensor (the front wide-band sensor), also known as an Air-Fuel Ratio Sensor or the read downstream sensor, can trigger a false P0420 code. Both sensors should be replaced with you replaced the converter.Note:This product is not legal for sale or use in California, Colorado, New York and Maine due to state emissions regulations.

Price: 147.89 USD

Location: Walnut, California

End Time: 2024-09-23T16:42:05.000Z

Shipping Cost: 0 USD